| |
 |
|
CENTRIFUGAL BLOWER
|
|
Centrifugal
Blower draws the air into the inlet of the blower housing,
through out the wheel, and discharges it at 90 degrees
out through the discharge of the blower housing. Centrifugal
Blowers are generally made of mild steel, stainless
steel or fabricated sheet. |
|
|
Salient Features
- Cost
Effective
- Large
Air Volumes & Pressure
- High
Efficiency, Low Power Consumption
- Easy
to Install
- Low
Maintenance
- Variable
air pressure
Induced & Forced draft Blowers
We
are manufacturing a wide range of centrifugal
blowers to suit n number's of industrial applications.
Centrifugal Blowers are well engineered and having
high efficiency incorporating all the latest technologies.
Being the heart of the Blower, the right selection
of Impeller is suitably designed for required
combination of air quantity and air pressure for
various applications. We are manufacturing impellers
in Mild Steel / Stainless steel / F.R.P./ Aluminum
with F.R.P. / Rubber lining Impellers as per requirements.
Impellers are duly machined after quality fabrication
and Statically & Dynamically balanced for
minimum sound level and vibration.
Backward Curved
-
CABL
Series - 20 Models, Starts from 150 mm I.D.
to 1600 mm I.D.
-
CAMBM Series - 21 Models, Starts from 150
mm I.D. to 1600 mm I.D.
-
CAHBM Series - 17 Models, Starts from 100
mm I.D. to 1000 mm I.D.
-
CAHBH Series - 11 Models, Starts from 100
mm I.D. to 700 mm I.D.
|
|
|
Backward Curved with Radial Tip
|
|
-
CAMRL Series - 19 Models, Starts from 200 mm I.D.
to 1600 mm I.D.
-
CAMRM Series - 17 Models, Starts from 300 mm I.D.
to 1600 mm I.D.
-
CAHRM Series - 10 Models, Starts from 300 mm I.D.
to 900 mm I.D.
|
|
Straight Blade |
|
-
CASL
Series - 10 Models, Starts from 200 mm I.D. to 700
mm I.D.
-
CAMSL Series - 09 Models, Starts from 200 mm I.D.
to 600 mm I.D.
-
CAMSM Series - 15 Models, Starts from 150 mm I.D.
to 1000 mm I.D.
-
CAHSM Series - 15 Models, Starts from 100 mm I.D.
to 800 mm I.D.
-
CAHSH Series - 11 Models, Starts from 100 mm I.D.
to 600 mm I.D.
|
|
Limit Load Blowers |
|
Limit
Load of a fan unit can be define as the maximum shaft
horse power (BHP) of a fan at the particular operating
speed, irrespective of the air delivery and pressure
development performance of it. These fans are very well
known in regard to ventilation and air conditioning
applications. These fans are of Limit Load characteristics,
and provide quieter operation and better efficiency.
- Single
Inlet Single Width (SISW type)
CALLS
Series-
15 Models From Wheel Diameter
457 mm to 1854 mm
- Double
Inlet Double Width (DIDW type)
CALLD
Series
- 19
Models From
Wheel
Diameter 457 mm to 2051 mm
|
|
Forward Curved Blowers
|
|
Centrifugal
Blowers with forward curved impellers have forward curved
blades. These fans are used when we require max. efficiency
with low power consumption and noise level. By using
these fans we can achieve high volume at a low pressure.
These blowers are mainly used in Air Cooling Plants,
Pressurization / Ventilation Systems etc.
- Single
Inlet Single Width (SISW
type)
CAFC-S-
Series-
06 Models - Fan Size 330 to 630 mm
- Double
Inlet Double Width (DIDW
type)
CAFC-D-Series-
10 Models - Fan Size 330 to 1000 mm
|
|
|
|
 |
|
